What should we do if micro sd card (memory cards) cannot be read? With these solutions, we can almost always fix the cards by ourselves.
post @ September 03, 2021 09:01 Michael Wilson

What should we do if memory cards cannot be read? Solutions are listed as follow. [detailed]

MicroSD card, we usually refer it as "memory card". Although the name is not accurate, it is easy to understand. In daily life, you sometimes find that your mobile phone or card reader cannot read the memory card, and even prompts you to format your memory card. To be honest, it is trivial to replace a broken memory card, but the data you stored in it is priceless. So, what should we do when the memory card cannot be read? Don't worry, today we bring you the solutions to the 12 major problems of mobile phone memory cards.

 theSolutions how to fix sd cards can't read.

Fault 1:

The memory card cannot be recognized when it is inserted into the computer. This situation is often caused when formatting memory card on computer, but its format is not compatible with the mobile phone.

Solution: Put the card back into the phone, and reformat it with the formatting function on the phone.

Fault 2:

The webpage cannot be opened when memory card is inserted in the phone, but can be opened once the card is unplugged.

Solution: The situations like unable to open the webpage, or the network has no response, may all be caused by a third-party input method, switch back to the original input method to solve the problem.

Fault 3:

The phone prompts "Unplug the memory card, please press OK". You have to pull out the card according to the prompts, and then plug it back in the phone to use it. But after a while, the prompt will show up again, and you have to repeat the moves all the time.

Solution: The reason for this situation is that you plug and unplug memory card too often, causing the card slot to be too loose to have good contact. You can consider to go to the customer service to check the mobile phone, and be careful not to use too much strength when plug memory card in the future or only use the mobile phone to read instead moving memory card.

Fault 4:

The reading and writing speed of the memory card is getting slower and slower, far worse to when it was first bought. They are all memory device, the memory card in the mobile phone is the same as the ones in the computer. After using it for a while, frequent deletion and copying will cause disk fragments and therefore affect the reading and writing speed. However, the disk format of the hard disk is FAT32 or NTFS, and format of the memory card in the mobile phone is FAT16. Therefore, if you defragment your mobile phone on computer, a series of errors will often appear. In the worst case, there will be errors when insert memory card into the mobile phone.

Solution: In fact, we only need to copy the hidden files in the memory card, format the card and copy the files back in.

Fault 5:

The mobile phone suddenly asks for the memory card password, or otherwise it will deny access. But there is no setting before, very unfortunately, you are very likely to be affected by a mobile phone virus - CARDK Trojan. This little Trojan can perfectly disguise itself as the break version of INSTANT.SIS software to spread. When you accidentally run it, it will set a password for your card. This password is a randomly generated 16 digit figure, and the possibility of cracking it is almost 0. If you are affected, you can only say goodbye to your memory card.


A: Don't accept any applications or text messages from strangers, especially those from unfamiliar Bluetooth. It is best not to download any unknown software, and should scan the software for virus first after downloading

B: Try to download things from trustable sites;

C: Install a professional virus detecting software such as LBE (big V’s choice) or 360 or Jinshan on your phone.

Fault 6:

After copy nearly 3GB files in a 4GB memory card, the memory card cannot be safely removed. But when we unplug it and insert it into a phone, the phone will display that the card is damaged. If we connect the card back to the computer, the computer can no longer recognize it. Occasionally, memory cards cannot be safely removed when you write a large amount of data in it at once.

Solution: It is recommended to copy files separately, when the file is too large. If the mobile phone memory card cannot be identified by the computer, you can perform the following operations:

A: Format the card with FAT16 on the computer;

B: Format the memory card on the phone

Fault 7:

When formatting the memory card on mobile phone, it shows that the memory card has already been used.

Solution: Restart the phone and try the following steps: turn off the phone, re-plug the memory card, and turn on your phone.

Fault 8:

Many programs in the phone cannot operate properly. When connecting the memory card with the phone, it shows that the memory card does not exist and cannot be connected.

Solution: This situation is likely to be caused by the rename of the memory card, and that leads to a program error. Just export the registry and use the notebook on your computer to replace the names of the memory card in batches.

Fault 9:

Memory card cannot be used after being formatted.

Solution: First check the card to see if it is formatted into FAT32 format. If it is formatted with FAT16, you must reformat and select the formatting format as FAT32. If the problem still exists, you can try to repair it with the disk tool in the computer system.

Fault 10:

The multimedia photos and video files stored in the memory card suddenly disappeared.

Solution: Connect the memory card to the computer with a card reader, determine its drive letter, open the computer's start menu, select run, enter CMD and press Enter, and enter VHKDSSKH:/the drive letter of the computer under the MS-DOS command.

Fault 11:

After formatting the memory card, many software cannot be used normally.

Solution: Before formatting the memory card, you must uninstall the software that are left in the phone, otherwise errors will occur when install software of the same version, and the backup files on the memory card will be formatted.

Fault 12:

After connecting the memory card with the computer via card reader, the computer crashed, and two situations may occur:

A: The computer prompts that the memory card cannot be read;

B: After waiting for a long time, we lost patient and took out the memory card. Then computer shows that the memory card could not be operated on.

Solution: Check whether the card reader has been connected properly, or you will have to change the card reader, or just format it, If it still doesn’t work, you will have to change the card.


It must be noted here that the above methods are collected from the Internet, in order to help our friend to solve mobile phone problem conveniently. These methods can basically solve all the current problems of the memory card. If you think the above method is useful, you may save it first in case of emergency, or share it with friends around you.

The above is the introduction of what to do when the memory card cannot be read, and the methods of repairing memory card. I hope it will be helpful to you!

Michael Wilson Recommended articles at 2022-01-27

How to Unlock Protection on an SD Card
Difference between USB 2.0 and USB 3.0
How is the production process for MICRO SD Card by Wafers?
How to choose a soft pvc USB flash drive
What is 3D NAND? What are the Advantages of 3D NAND Compared with 2D NAND?
How to choose CF, SD and Micro SD cards: this article will teach you how to buy a satisfactory memory card.
The Guide for USB Drives in 2019
How to Recover a Micro SD Password
post @ September 03, 2021 09:01 Michael Wilson views(372) comment(0)
Tags: {name}

Nickname* :
Email* :
Comment* :